Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Caps & crowns
Masonry repair
Before
After
Before
After
Before
AfterChimney Cleaning in Marietta, GA
A Level 2 chimney cleaning and inspection in Marietta runs $180-$340 for a standard sweep with camera documentation, with cap, crown, and liner work priced separately in writing before we start. Marietta’s mix of 1970s-1990s prefab fireplaces and historic masonry around the Square means we regularly find cracked refractory panels, failed chimney crowns, and hidden creosote in systems that haven’t been opened in years. Call (470) 288-2763 for a written estimate - estimates are free, and we schedule from our Atlanta office with crews serving Marietta directly.
Why Marietta Homes Are Different
Marietta sits at the intersection of two completely different chimney problems. Around Marietta Square and the historic districts, we work on masonry chimneys built with soft lime mortar before 1940, joints that crumble faster in Cobb County’s 50 inches of annual rain and clay soil that shifts through wet-dry cycles. Move east to the subdivisions along Roswell Road or Johnson Ferry, and we’re opening factory-built fireplaces from the 1985-1998 tract-home boom - Heatilator and Superior boxes now 30 to 50 years old, their refractory panels cracked through from thermal cycling that homeowners never noticed because Marietta’s mild winters mean occasional, low-temperature burns.
That climate pattern matters. January lows around 34°F are cold enough to want a fire, but warm enough that most Marietta residents light only a dozen fires a season. Incomplete combustion at low temperatures deposits second-stage creosote - sticky, shiny, and highly flammable - without ever reaching the sustained heat that would burn it off. By the time we get the call, it’s often been five years or more, and the inspection becomes a safety audit as much as a sweep.
Our Main Marietta Services
Most calls from Marietta homeowners fall into three categories - routine maintenance, damage repair, and fireplace system service. Here’s what each involves locally:
Chimney Cleaning & Sweep in Marietta
Our standard Marietta visit follows NFPA 211 Level 2 protocol: camera down the flue, rotary sweep of the smoke chamber and firebox, and a documented photo record under Haven Standard Clause 4. In East Cobb’s older prefab systems, we often find the original refractory panels deteriorated beyond code; in historic masonry near the Square, it’s moisture-damaged flue tiles and eroded mortar joints. Every finding is photographed, every price is written before work starts. Chimney Cleaning & Sweep in Marietta
Chimney Repair in Marietta
Marietta repairs split by era: crown cracks and spalling brick in historic masonry from water intrusion, versus chase cover rust and deteriorated chase tops in 1980s-1990s prefab systems. Our crews carry DuraFlex liner sections and HeatShield refractory mortar for same-visit repairs when possible, with full documentation and the 365-Day Done Right Promise on every job. Chimney Repair in Marietta
Fireplace Services in Marietta
We service gas log sets, direct-vent inserts, and open wood-burning systems across Marietta, from historic coal-converted fireplaces near Whitlock Avenue to modern direct-vent units in newer West Cobb builds. Gas valve testing, thermocouple replacement, and burner cleaning are quoted in writing with parts from Famco and Copperfield through our Haven buying network. Fireplace Services in Marietta
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Marietta
Chimney cap and crown work in Marietta is shaped by two forces: the 50-inch annual rainfall that destroys unprotected masonry, and the 1980s-1990s prefab chase tops that rust through after 25-30 years in Cobb County’s humidity. In East Cobb subdivisions, we regularly replace original galvanized chase covers with stainless steel; around historic Marietta Square, we repour concrete crowns and install custom caps to stop water entering soft lime-mortar joints. Chimney Cap & Crown work is quoted in writing before we start, with photos of the damage you can see for yourself.
Cap Installation
Signs you need it
Water stains on the firebox walls, rusted damper, or visible gaps between the flue tile and masonry top mean your flue is open to Marietta’s heavy rainfall.
What it costs in Marietta
Standard single-flue stainless steel cap installation runs $180-$340; custom multi-flue or copper caps range $450-$890 depending on chase dimensions.
How we do it
We measure the flue or chase opening, fabricate or order the cap from Copperfield or Famco stock, and secure it with masonry anchors and high-temp sealant, then photograph the completed installation for your record.
Crown Repair
Signs you need it
Cracks wider than 1/8 inch on the concrete crown surface, pieces missing at the edges, or water pooling on top after rain indicate crown failure letting moisture into the stack.
What it costs in Marietta
Crown crack sealing with flexible waterproof coating runs $280-$450; partial crown reconstruction is $650-$1,200; full crown replacement pours at $1,400-$2,800.
How we do it
We grind out cracked concrete, apply bonding agent, pour new high-strength concrete with proper slope and overhang, then seal with silicone-based crown coat rated for freeze-thaw cycling.
What Chimney Cap & Crown Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Single-flue stainless cap installed | $180 - $340 |
| Multi-flue custom cap installed | $450 - $890 |
| Crown crack seal / coating | $280 - $450 |
| Partial crown reconstruction | $650 - $1,200 |
| Full crown replacement | $1,400 - $2,800 |
Do I need a cap if my chimney is in good shape?
Yes - an uncapped flue in Marietta’s rainfall collects water that destroys mortar, rusts dampers, and creates odor problems; a cap is preventive maintenance, not repair.
How long does a crown repair last?
A properly poured and sealed crown with correct slope and overhang lasts 20-30 years; our coating carries the 365-Day Done Right Promise and we document condition annually on return visits.
Chimney Liner & Rebuild in Marietta
Chimney liner and rebuild work in Marietta is driven by aging housing stock: clay flue tiles in pre-1940 masonry near the Square crack from thermal shock and ground movement, while 1980s prefab systems in East Cobb reach end-of-life with original galvanized liners rusted through. Both conditions create fire hazards and carbon monoxide risks that a standard sweep won’t catch - only camera inspection reveals them. Chimney Liner & Rebuild quotes include the full scope, material specs from DuraFlex or HeatShield, and written warranty before work begins.
Stainless Steel Liner
Signs you need it
Clay tile chunks in the firebox, visible cracks in flue tiles on camera scan, or a smoky smell when the furnace runs indicate liner failure.
What it costs in Marietta
Flexible stainless steel liner with insulation and top plate runs $2,800-$4,500 for a standard fireplace flue; rigid DuraFlex for straight runs is $2,200-$3,800.
How we do it
We camera-inspect the full flue length, drop the correctly sized flexible or rigid liner, insulate per manufacturer spec, and install a new top plate and cap, with photo documentation of every stage.
Partial Rebuild
Signs you need it
Spalling brick face, mortar joints eroded more than 1/2 inch deep, or a visibly leaning stack above the roofline mean structural failure requiring rebuild.
What it costs in Marietta
Partial rebuild from the roofline up runs $3,500-$6,500; shoulder rebuilds including smoke chamber work range $4,500-$8,500 depending on scaffolding needs.
How we do it
We dismantle to sound masonry, install temporary bracing if needed, lay matching brick with type-N or type-S mortar as appropriate for the era, and install a new crown and cap before final camera inspection.
What Chimney Liner & Rebuild Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Flexible stainless liner (fireplace) | $2,800 - $4,500 |
| Rigid stainless liner (straight flue) | $2,200 - $3,800 |
| Partial rebuild (roofline up) | $3,500 - $6,500 |
| Shoulder rebuild with smoke chamber | $4,500 - $8,500 |
Can I just patch a cracked clay liner instead of replacing it?
HeatShield resurfacing works for minor cracking if the tile structure is sound, but missing tiles, large gaps, or shifted flue sections require full liner replacement for NFPA 211 compliance and safe operation.
How do I know if my chimney needs a rebuild or just repointing?
Camera inspection and physical probe of mortar joints tell the story: repointing fixes surface erosion, but spalled brick, internal tile collapse, or structural lean require rebuild; we show you the photos and explain which category you’re in before quoting.
Brands We Service in Marietta
We stock and install caps, liners, and repair materials from DuraFlex, HeatShield, Famco, and Copperfield, sourced through the Haven buying network to keep prices honest. Most standard cap and liner sizes are on our Atlanta-area trucks, with custom orders typically arriving in 3-5 business days. our brands
Pricing for Chimney Cleaning in Marietta, GA
| Service | Typical range in Marietta |
|---|---|
| Level 2 sweep with camera inspection | $180 - $340 |
| Single-flue stainless cap installation | $180 - $340 |
| Multi-flue custom cap installation | $450 - $890 |
| Crown crack seal / coating | $280 - $450 |
| Partial crown reconstruction | $650 - $1,200 |
| Full crown replacement | $1,400 - $2,800 |
| Flexible stainless steel liner | $2,800 - $4,500 |
| Rigid stainless steel liner | $2,200 - $3,800 |
| Partial rebuild (roofline up) | $3,500 - $6,500 |
| Shoulder rebuild with smoke chamber | $4,500 - $8,500 |
Prices in Marietta run higher for historic masonry with difficult roof access or when scaffolding is required on steep pitches; prefab chase work in East Cobb subdivisions is typically more accessible and prices toward the lower end of each range. Every job gets a written price, written scope, and written warranty before any work starts - Haven Standard Clause 1, no exceptions.
Neighborhoods We Serve in Marietta
Our crews work across Marietta’s full footprint, from historic homes near Whitlock Avenue to the subdivision rings of East Cobb and West Cobb. Scheduling is coordinated from our Atlanta office with same-week availability typical year-round, busier in September through November before burning season.
- Historic Marietta Square and surrounding districts
- East Cobb (subdivisions along Roswell Road, Johnson Ferry corridor)
- West Cobb (newer builds near Kennesaw border)
- Indian Hills and Paper Mill Road area
- Shallowford Road corridor
Service Area - Cities Near Marietta
Emberly Chimney Cleaners serves the broader metro Atlanta chimney market from our Atlanta dispatch office, with regular appointments in Kennesaw, GA, Woodstock, GA, and Acworth, GA to the north and west, plus direct Atlanta, GA coverage for intown properties. All service area jobs follow the same Haven Standard: written price first, camera documentation included, 365-Day Done Right Promise on every completion.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Marietta
Most chimney repairs and liner replacements in Marietta require a Cobb County building permit; we pull permits as part of our standard process and include the documentation in your job packet - no additional fee for permit handling.
We typically book Level 2 inspections within 3-7 days in Marietta, with September through November filling fastest; call (470) 288-2763 for current availability and we’ll hold a slot with no deposit.
Yes - we work in gated and HOA communities throughout East Cobb regularly; our technicians carry background-check documentation and uniform ID for HOA office verification if your association requires vendor registration.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marietta Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.